User's Manual

“DSS/COAX CONNECTOR PROTECTION”

Provide protection against surges on cable, DSS, and cable modem.

OPERATION

USE USB TRANSMITTER TO CONTROL ENERGY SAVER OUTLETS

Devices such as desktop pc, laptop or LCD/LED TV with USB port are ideal to be

used as the main device.

Connect USB Transmitter to main device USB port.

When you turn on the main device, USB Transmitter will sense the power in the

USB port, and wirelessly turn on the ENERGY SAVER outlets on the Surge

Protector.

When you turn off the main device, USB Transmitter will sense no power in the

USB port, and wirelessly turn off the ENERGY SAVER outlets on the Surge

Protector to eliminate stand-by power waste.

While USB Transmitter is connected to main device and device is on, you can

make the Energy SAVER outlets always on by pressing the button on the USB

Transmitter for 3 seconds. By doing so, the ENERGY SAVER outlets will remain on

even after you turn off the main device or remove USB Transmitter from the main

device.

Note : When the main device is turned off, the ENERGY SAVER outlets will be

turned off after 120~180 seconds.

This is to avoid immediate power cut off of the device on ENERGY SAVER outlets

while it is still in operation, so there is still time to turn off peripheral devices

before power is cut off.

When the ENERGY SAVER ON indicator light flashes, this indicates the ENERGY

SAVER outlets will be turned off in about 120 seconds.

USE USB TRANSMITTER AS A STAND-ALONE WIRELESS REMOTE

When the USB Transmitter is not connected to the main device, it can still be used

as a stand-alone wireless remote to control the ENERGY SAVER outlets on the

Surge Protector.

Simply press the button once on the USB Transmitter to turn on the power of the

ENERGY SAVER outlets. Press the button once to turn off the power of the ENERGY

SAVER outlets.

SURGE PROTECTOR MANUAL ON/OFF AND LEARNING BUTTON

Note : This button serves as Manual and Learning functions.

Manual On/Off

If you have lost your USB Transmitter, you can still manually switch on/off the

ENERGY SAVER outlets on the Surge Protector

1. Press the button once to switch on the ENERGY SAVER outlets. The ENERGY

SAVER ON indicator light will illuminate to indicate that the ENERGY SAVER

outlets are switched on.

2. Press the button once to switch off the ENERGY SAVER outlets. The ENERGY

SAVER ON indicator light will go off to indicate that the ENERGY SAVER outlets

are switched off.

USB Smart Surge Manual All Versions V1.0