Model No. MT4010 Owner’s Manual MITER SAW STAND QUESTION... 1•847•780•6120 Visit us on the web at powertecproducts.com You will need this manual for safety instructions, operating procedures, and warranty. Put it and the original sales invoice in a safe, dry place for future reference.
TABLE OF CONTENTS SECTION SAFETY RULES PAGE 1 PRODUCT SPECIFICATIONS Net Weight.................................................................33.6 lbs Weight Capacity ASSEMBLY 2 Unpacking Tools Needed Assemble Wheels To Raise the Stand Assemble Roller Bar Mounting the Miter Saw OPERATION Height Top of Bed.................................................. 33-19/50" Mounting Bracket.........................................1-13/16" wide x ...................................................
WARNING For your own safety, read all of the rules and precautions before operating tool. WARNING Always follow proper operating procedures as defined in this manual even if you are familiar with use of this miter saw stand or any tool used with this stand. Remember that being careless for even a fraction of a second can result in severe personal injury. You must be familiar with the use of any tool or accessory used with this miter saw stand.
ASSEMBLY ASSEMBLY 2 UNPACKING Refer to Figure 1 Check for shipping damage. Check immediately that all parts and accessories are included.
ASSEMBLY • Depressing the side of the wheel bracket with the unlock symbol to unlock the wheel. Figure 3 MOUNTING THE MITER SAW Refer to Figure 6-7 WARNING Risk of accidental starting and serious personal injury. Unplug the miter saw and lock the head down before attaching it to the miter saw stand. WARNING Do not mount a table saw on this miter saw stand. Aggressive feeding of sheet materials into a table saw could cause the stand to tip over.
ASSEMBLY Figure 7 WARNING Hook to Rail Risk of serious personal injury. Always make sure the miter saw is fully supported and securely attached to a level work surface. Make sure the miter saw stand is located on a flat surface. 4 • Lift and slightly tilt the saw/mounting bracket assembly away from you and position it onto the miter saw stand.
Refer to Figure 10–12 Handle Figure 11 Quick Release Knob OPERATION TRANSPORTATION WARNING Risk of unsafe operation. Ensure proper footing and use caution when rolling the miter saw stand to prevent tipping or loss of balance. • The miter saw stand can ONLY be rolled from one location to another with the miter saw mounted. • DO NOT fold the stand with the miter saw mounted. • DO NOT transport the stand with the miter saw mounted. To Roll the Miter Saw Stand • Unlock the wheels.
MAINTENANCE MAINTENANCE 6 GENERAL MAINTENANCE WARNING 6 When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. To ensure safety and reliability, all repairs should be performed by a qualified service technician. WARNING Keep the miter saw stand dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum based products or any strong solvent to clean the miter saw stand .
7 WARRANTY WARRANTY Thank you for investing in a POWERTEC power tool. This product has been designed and manufactured to meet high quality standards and is guaranteed for domestic use against defects in workmanship or material for a period of 12 months from the date of purchase. This guarantee does not affect your statutory rights. SOUTHERN TECHNOLOGIES LLC.
PARTS LIST 8 8 MITER SAW STAND PARTS ILLUSTRATION
Key# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 Part# MT4010001 MT4010002 MT4010003 MT4010004 MT4010005 MT4010006 MT4010007 MT4010008 MT4010009 MT4010010 MT4010011 MT4010012 MT4010013 MT4010014 MT4010015 MT4010016 MT4010017 MT4010018 MT4010019 MT4010020 MT4010021 MT4010022 MT4010023 MT4010024 MT4010025 MT4010026 MT4010027 MT4010028 MT4010029 MT4010030 MT4010031 MT4010032 MT4010033 MT4010034 MT4010035 MT4010036 MT4010037 MT4010038 Description Wo
Southern Technologies, LLC Waukegan, IL 60087
