Use and Care Manual

NOTE: If after following the To Use
instructions the marks are not properly
aligning, use a square to verify the hairline
is perpendicular to the body. If the hairline
is NOT perpendicular, loosen the two
screws, reset the hairline and re-tighten.
See Figure 5.
Figure 5
If needed,
loosen
screws and
reset
Southern Technologies, LLC
Waukegan, IL 60087
Put these instructions and the original sales invoice in a safe,
dry place for future reference.
Visit us on the web at powertecproducts.com
19-0524