User Manual

PPOOWWEERRTTAAPP SSLL IINNTTEERRVVAALL MMOODDEE

SSLL IInntteerrvvaall MMooddee

The PowerTap Pro Interval mode functions differently than the previous

PowerTap computers. It works as a lap marker, and is essentially always on.

To begin the first interval, or advance the interval, simply press both buttons

down simultaneously from any location or mode in the display. “INT” and

the new interval # will briefly appear, before disappearing again to the back-

ground. To view interval specific information (duration, distance, averages,

etc) simply hold down the mode button for two seconds. This brings inter-

val mode to the foreground. “INT” and the interval number will constitute a

fourth line in the display (see picture at right). When you wish to relegate the

interval information to the background again, simply depress the mode but-

ton for two seconds.

SSLL IInntteerrvvaall MMeemmoorryy MMooddee

To access stored interval information select “INT” by pushing mode until

“INT” blinks. Then hold select for 2 seconds until M appears next to the

interval number indicating you are now viewing interval information. Push

select to advance to the interval you wish to view and push mode to select

the information you wish to view. (Ave. watts, cadence, etc.)To exit Interval

Memory Mode hold mode for 2 seconds.

NNoottee tthhaatt rreeccoovveerryy ppeerriiooddss aass wweellll

aass wwoorrkk ppeerriiooddss aarree ddiissppllaayyeedd iinn mmeemmoorryy mmooddee..

SSLL IInntteerrvvaall SShhoorrttccuutt

To quickly mark intervals simply push both buttons simultaneously from

either trip or interval mode. If in trip mode “INT” will briefly appear indicating

you have marked an interval and which number interval you are on.

watts

speed

int

multi