Instruction Manual

ManualsBrandsPowersolve ManualsPower suppliersSM6000 Series

Three phase input

SM 6000 - Se ries 6000 W DC POWER SUP PLIES

nit 8A

Arnhem Road

Newbury. RG14 5RU

Tel

: +44 (0) 1635 521858

Fax: +44 (0) 1635 523771

www.powersolve.co.uk

• cTUVus safety ap proval

• De signed for long life at full power

• Ex cel lent dy namic re sponse to load changes

• Pro tected against all over load and short cir cuit

con di tions

• EMC sur passes CE re quire ments:

low emis sion & high im mu nity

• Low au di ble noise: tem per a ture con trolled fans

• Avail able op tions: an a log & dig i tal In ter faces,

High Speed Pro gram ming, Dig i tal Encoders,

Se quencer, Power Sink etc.

• Mas ter/Slave par al lel and se ries op er a tion with

volt age and cur rent shar ing

• Stack ing is al lowed, space be tween units

is not re quired

• High power sys tem con fig u ra tion from mul ti ple units

• 19" rack mount ing or lab o ra tory use

(feet in cluded)

• Re mote sens ing

• Interlock

Features Functionalities

SM 15-400 0 - 15 V 0 - 400 A

SM 30-200 0 - 30 V 0 - 200 A

SM 45-140 0 - 45 V 0 - 140 A

SM 60-100 0 - 60 V 0 - 100 A

SM 70-90 0 - 70 V 0 - 90 A

SM 120-50 0 - 120 V 0 - 50 A

SM 300-20 0 - 300 V 0 - 20 A

SM 600-10 0 - 600 V 0 - 10 A

Mod els Volt age range Cur rent range

Summary of content (6 pages)

PAGE 1
Unit 8A Arnhem Road Newbury. RG14 5RU Tel: +44 (0) 1635 521858 Fax: +44 (0) 1635 523771 www.powersolve.co.
PAGE 2
SM6000 SM 15-400 SM 30-200 SM 45-140 SM 60-100 Output voltage current Input AC 3 phase, 48 - 62 Hz for use at 380 V, 400 V, 415 V nominal line - line voltage 0 - 15 V 0 - 400 A 0 - 30 V 0 - 200 A 0 - 45 V 0 - 140 A 0 - 60 V 0 - 100 A SM 70-90 0 - 70 V 0 - 90 A SM 120-50 SM 300-20 SM600-10 0 - 120 V 0 - 50 A 0 - 300 V 0 - 20 A 0-600 V 0-10 A 342 - 457 V 342 - 457 V 342 - 457 V 342 - 457 V 342 - 457 V 342 - 457 V 342 - 457 V 342 - 457 V Option P165 for use at 440 V, 480 V (USA) (operates from 360 V
PAGE 3
SM6000 Status outputs CC - status LIM - status OT - status PSOL - status ACF - status DCF - status CC - operation CV or CC limit Over Temperature Power Sink Overload AC - Fail DC - Fail 1) Relay Outputs ACF DCF AC - Fail DC - Fail 1 ) 5 V = logic 1 5 V = logic 1 5 V = logic 1 5 V = logic 1 5 V = logic 1 5 V = logic 1 (Ro = 500 Ohm) (Ro = 500 Ohm) (Ro = 500 Ohm) (Ro = 500 Ohm) (Ro = 500 Ohm) (Ro = 500 Ohm) both NO and NC contact both NO and NC contact 1 ) output ± 5% beyond set point with + 5V, 1
PAGE 4
SM6000 EMC Power Supply Standard EN 61204-3, Emission: residential, light industrial environment (CISPR22-Class B) Immunity: industrial environment Generic Emission Generic Immunity EN 61000-6-3, residential, light industrial environment (EN 55022 B) EN 61000-6-2, industrial environment − 20 to + 50 °C derate output to 75% at 60 °C Operating Temperature at full load max. 95% RH, non condensing, up to 40 °C max.
PAGE 5
SM6000 Typical Applications • • • • • • • Solar inverter testing, PV-Simulation Controlled Battery (dis)charging Plasma chambers Lasers Hybrid Car test systems Driving PWM-Controlled DC motors • • • Accurate current sources Automotive battery simulations Aerospace and military equipment ATE in industrial production lines Available Options High Speed Programming Increased Output Power Two-Quadrant Output: Power sink The conservatively rated unit allows to deliver extra output with the same reliabi
PAGE 6
SM6000 CV= Constant Voltage CC= Constant Current Specifications measured at tamb = 25 ± 5 °C and Vin = 400 V AC, 50 Hz, 3 phase, unless otherwise noted.