Manual

For full specications and order information please visit www.deltapowersupplies.com
D E LTA ELEKTRONIKA
DC POWER SUPPLIES
D E LTA ELEKTRONIKA
DC POWER SUPPLIES
12 13
For full specications and order information please visit www.deltapowersupplies.com
ES300 Series
300 W dC PoWer SUPPlieS
Features
• Very low output ripple and spikes
• EMC surpasses CE requirements:
low emission & high immunity
• High programming speed
• Excellent dynamic response to load changes
• Protected against all overload
and short circuit conditions
• Designed for long life at full power
Unit Voltage range Current range
ES 030 - 10 0 - 30 V 0 - 10 A
Specications
• Single phase input : 92-265 V AC (48-62 Hz)
• Active Power Factor Correction (PFC) : 0.99 / 0.96 (at 100% load)
• Eciency : up to 86% (at full load)
• Output ripple and spikes : 5 mV
rms
/ 15 mV
pp
• Regulation : 10 mV (0-100% load step)
• Recovery time : 50 µs (50-100% load step)
• Programming speed : 0.8 ms (10-90%)
• Analog programming accuracy : from 0.2%
• Output voltage and current stability : 30.10
-5
/ 10.10
-4
• MTBF : 500.000 hrs
• Operating ambient temperature : -20 to +50 °C
Functionalities
• Master / Slave parallel and series opera-
tion with voltage and current sharing
• Voltage and current control with
10 turn potentiometers
• For laboratory use or op-
tional 19” rack mounting
Standards
• Power supply standard EN 61204-3
• Generic Emission EN 61000-6-3 (EN 55022B)
• Generic Immunity EN 61000-6-2
• Safety EN 60950 / EN 61010
• Insulation input / output 3750 V
rms
• Enclosure IP20
Width = half 19”
Height = 66 mm, incl. feet
Weight = 3,1 kg
Dimensions and Weight
Available Options
More information about options.
Page 14
ES150 Series
150 W dC PoWer SUPPlieS
Features
• Very low output ripple and spikes
• EMC surpasses CE requirements:
low emission & high immunity
• Excellent dynamic response to load changes
• Protected against all overload
and short circuit conditions
• Designed for long life at full power
Units Voltage range Current range
ES 015 - 10 0 - 15 V 0 - 10 A
ES 030 - 5 0 - 30 V 0 - 5 A
ES 075 - 2 0 - 75 V 0 - 2 A
ES 0300 - 0.45 0 - 300 V 0 - 450 mA
Specications
• Single phase input : 90-265 V AC (48-62 Hz)
• Active Power Factor Correction (PFC) : 0.99 / 0.83 (at 100% load)
• Eciency : up to 84% (at full load)
• Output ripple and spikes : from 0.5 mV
rms
/ 8 mV
pp
• Regulation : from 5 mV (0-100% load step)
• Recovery time : from 100 µs (50-100% load step)
• Programming speed : from 7 ms (10-90%)
• Analog programming accuracy : from 0.2%
• Output voltage and current stability : from 10.10
-5
/ 10.10
-5
• MTBF : 500.000 hrs
• Operating ambient temperature : -20 to +50 °C
Functionalities
• Master / Slave parallel and series opera-
tion with voltage and current sharing
• Voltage and current control with
10 turn potentiometers
• For laboratory use or op-
tional 19” rack mounting
• Convection cooling
Standards
• Power supply standard EN 61204-3
• Generic Emission EN 61000-6-3 (EN 55022B)
• Generic Immunity EN 61000-6-2
• Safety EN 60950 / EN 61010
• Insulation input / output 3750 V
rms
• Enclosure IP20
• cTÜVus
Width = half 19”
Height = 66 mm, incl. feet
Weight = 1,7 kg
Dimensions and Weight
50 202 21 222
5214
Available Options
More information about options.
Page 14