Manual

D E LTA ELEKTRONIKA
DC POWER SUPPLIES
24
For full specications and order information please visit www.deltapowersupplies.com
Analog Series
analog interFaCeS
Specications
• Programming and monitoring oset : +/- 60 µV typical
• Full scale error : 0.1% calibrated
• Non-linearity : 0.01% typical, TC = - 65ppm/°C
• Common mode rejection : 80 dB @ 50 Hz
Features
• Selectable 0-5 V and 0-10 V signal levels
• Isolated programming and monitoring of U, I and status signals
• Prevents problems with earth loops and CM-voltages
• Factory installed or external module
• Reinforced safety insulation 1000 VDC*
* External module has Basic insulation only
Unit
ISO AMP Isolated Analog Programming
Specications
• Programming and monitoring oset : +/- 60 µV typical
• Full scale error : 0.1% calibrated
• Non-linearity : 0.01% typical, TC = - 65ppm/°C
• Common mode rejection : 80 dB @ 50 Hz
Features
• Connecting SM3000 and ES-series in M/S series mode
• Equal voltage sharing in series operation
• Series operation possible up to 600 V
Unit
M / S - ADAPTER Master / Slave Series Adapter
Specications
• Undervoltage range : 18-48 V
• Overvoltage range : 24-64 V
• Insulation between circuits : 500 V DC
• Alarm contact : 100 mA / 30 V, Normally Closed
Features
• Large adjustment for use on both 24 V and 48 V
• Two isolated comparator circuits with alarm contact and LED indication
• Monitors output voltage of 2 power supplies
Unit
AL 24-48 Under and Over Voltage Alarm