User Manual

ManualsBrandsPowersolve ManualsPower suppliersHPW02401 Series

Powersolve Electronics Ltd., Unit 8A Arnhem Road, Newbury RG14 5RU, United Kingdom

Tel 0044 (0)1635 521858 Fax 0044 (0)1635 523771

www.powersolve.co.uk sales@powersolve.co.uk

p.1/4 03.12B

(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)

HPW02401 DIN Rail

Made in Germany

240W (312W) Power Supply -25...+70°C

85..264Vac active PFC & low inrush current

Short Specification:

•

Metal housing

• 91.5% efficiency

• -25°C...+70°C ambient

• Free air convection

• Galvanic insulated

• Continuous short circuit protected

• Overload & low voltage protected

• Soft start & auto-recovery

• Hold up time >40ms

• Minimum load = 0A

•

Electronic Inrush Current Limiter <7A

• EMI/EMS EN61000-6-2/3, EN55022 class B

• Active PFC: EN61000-3-2

• According to cUL60950, IEC(EN)60950-1

• Low voltage & overload control message

• Remote ON/OFF

• DIN Rail 35mm

• Screw terminals AWG20...AWG12

• High reliability, shock & vibration resistant

• Output Electrolytic Capacitors +125°C

Smar

t start

up with critical loads

- motor drives

- capacitive loads

- DC-DC-converters

- Batteries

Single-Out: 9...18V, 18...30V, 30...43V,

43..

53..

72V

68..

86V

In accordance with IEC60950-1

Summary of content (4 pages)

PAGE 1
HPW02401 DIN Rail Made in Germany 240W (312W) Power Supply -25...+70°C 85..264Vac active PFC & low inrush current Short Specification: • • • • • • • • • • Metal housing 91.5% efficiency -25°C...
PAGE 2
AC Input AC Input Rating DC Voltage Adjust Over Voltage Protection Rated Current 60°C Rated Current 40°C Boost 60s/60°C Ripple mVpp/230Vac Load regulation 0100% 85...264Vac , 47...63Hz , 90…350Vdc 100...240Vac , 115Vac <2.6A 230Vac <1.3A 9...18Vdc(12V) 18..30Vdc(24V) 30...43Vdc(36V) 43...53Vdc(48V) 53...72Vdc(60V) 68...86Vdc(72V) 21Vdc 35Vdc 50Vdc 60Vdc 84Vdc 97Vdc 15.0A (12Vdc) 19.0A (12Vdc) 18.0A (12Vdc) 30 (20MHz) ±0.
PAGE 3
Remote On/Off DC o.k. Message Enable a 10…30Vdc 20mA voltage signal to (Rmt/Rm) to shutdown the HPW, the yellow LED lights and 0V is distributed to the outputs. If the shutdown is short circuited or <500mV are applied to (Rmt/Rm), the HPW „tickers“, the yellow LED flashes and 5V is distributed to the outputs Disable the remote voltage to restart the PSU Series Connection Redundant Connection To increase the output power, equal HPW devices can be used series connected.
PAGE 4
Terminal Connects: 1=L 2=N 3 = GND SK1 SK2 1 = DC + 2 = DC + 3 = DC 4 = DC - SK3 A= Remote On/Off (shutdown) B= DC-OK Relay Screw terminal order codes: DC-fail-relay& Shutdown, one plug for each required (each package = 10 pcs ) Art.No.: 3520037 (2 pins) Optional Coating (option C): We offer the HPW-Series with optional coating. It is to be used in e.g. dusty, dirty, high humidity, or in awaiting quick temperature changes.