Manual

Dimensions

Di men sions of the ex ter nal ISO AMP MODULE.

ISO AMP - External module - Four channel analog isolation amplifier

Unit 8A

Arnhem Road

Newbury. RG14 5RU

l: +44 (0) 1635 521858

Fax: +44 (0) 1635 523771

www.powersolve.co.uk

Features

• Selectable 0-5 V and 0-10 V signal levels

• Isolated programming and monitoring of U, I and status signals

• Prevents problems with earth loops and CM-voltages

• Isolated logic inputs and outputs

• Pin compatible with D15 connector on Delta elektronika power supplies

Specifications

• Programming and monitoring offset : +/- 60 µV typical

• Full scale error : 0.1% calibrated

• Non-linearity : 0.01% typical, TC = 65ppm/°C

• Common mode rejection : 80 db @ 50 Hz

PAGE 1
Unit 8A Arnhem Road Newbury. RG14 5RU Tel: +44 (0) 1635 521858 Fax: +44 (0) 1635 523771 www.powersolve.co.
PAGE 2
Specifications Analog inputs / outputs: CV, CC programming and CV, CC monitoring Offset ± 60 µV typical, ± 180 µV max. Full scale error 0.1 % calibrated. Non-linearity 0.01 % typical, 0.05 % max. Temperature coefficient – 65 ppm typical. Common mode rejection 80 dB @ 50 Hz. Voltage range: 0-5V 0 - 5 V or 0 - 10 V selectable connector 'to power supply': connector 'to prog. source': Input impedance: connector 'to power supply': connector 'to prog.