Use and Care Manual

English

ASSEMBLY INSTRUCTION

ATTACHING WORK LIGHT HEAD TO STAND (FIG 1)

1.Placethestand(9)onaatsurface.

2.PositiontheU-Shapedbracket(3)oftheworklightheadagainstthestand(9)asshowninFIG1.

3.Usethelockingknob(6),atwasherandspringwashertosecuretheworklightheadonthestand.

OPERATION

ADJUSTING THE LIGHT DIRECTION

Yourworklightcanbetiltedverticallyupto30°downor90°up.

To Adjust the Light Direction,loosenthesidelockingknobs(5).Adjusttheworklightheadtodesiredposition,and

retighten knobs.

ON/OFF SWITCH

YourportableworklightisequippedwithanON/OFFswitch(7)locateonthebacksideoftheworklight.Pressthe

switch once to turn the work light on and press the switch a second time to turn it off. Always turn the work light off

before unplugging.

MAINTENANCE

Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.

Use the similar care for the stand and tripod.

WARNING: Always make sure the work light is unplugged and

completely cool before attempting to clean it.

WARRANTY

Thisproductiswarrantedfreefromdefectsinmaterialandworkmanshipfor2(Two)yearsafterdateofpurchase.This

limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is

coveredbythiswarrantyanditisnottransferable.Priortoreturningyourproducttostorelocationofpurchase,please

calltheToll-FreeHelpLineforpossiblesolutions.

ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.

HELP LINE

For questions about this or any other PowerSmith™ product,

PleasecallToll-Free: 888-552-8665

Or visit our website: www.powersmithproducts.com

Richpower Industries, Inc.

736HamptonRoad

Williamston,SC29697

PrintedinChina,onrecycledpaper