Use and Care Manual

6
English
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME EXPLANATION
V
Volts Voltage
A
Amperes Current
Hz
Hertz Frequency (cycles per second)
W
Watts Power
.../min.
Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Alternating Current Type of current
Direct Current Type of current
Read the Operator’s Manual
To reduce the risk of injury, the user must read and
understand operator’s manual before using this product
Wear Eye Protection
Always wear eye protection with side shields marked to
comply with ANSI Z87.1
Safety Alert Precautions that concern your safety.
Keep Bystanders Away Keep all bystanders at least 100 ft. away.
Wet Conditions Alert Do not expose to rain or use in damp locations
Richochet
Thrown objects can ricochet and result in personal injury or
property damage.
No Reach Do not reach hands or feet under mower deck.
Safety Key
Switch off and remove safety key before adjusting, cleaning
and before leaving the product unattended.
No Slope
Do not operate on inclines greater than 15º. Mow across the
face of slopes, never up and down.
Electric Shock Hazard
Failure to use in dry conditions and to observe safe practices
can result in electric shock.
Keep Hands and Feet Away Keep hands and feet away from blade and cutting area.