Use and Care Manual

FIG 6
HEIGHT ADjUSTMENT
LEVER
SETTING CUTTING HEIGHT
1 23/8"
2 23/4"
3 31/8"
4 31/2"
5 33/4"
6 41/8"
FIG 7
FIG 8
SAFETY KEY
KEY SLOT
KEY HOLDER
11
English
ASSEMBLY AND ADJUSTMENTS
SETTING THE BLADE HEIGHT (FIG 6)
When shipped, the wheels on the mower are set to a low-cutting position. Before using the mower for the first time,
raise the cutting position to the height best suited for your lawn. The mower can be set to 6 cutting heights between
2-3/8”(60mm)and4-1/8”(105mm).Choosethepropercuttingheightaccordingtothetypeandconditionofthe
grass.
WARNING: Do not make any adjustment to the lawn mower without first stopping
the motor, removing the battery pack and waiting for the blade to stop rotating.
WARNING: Keep your feet away from the deck when adjusting its height.
To Adjust the Blade Height (FIG 6)
•
Grasp the height-adjustment lever, and move it outwards.
• Move the lever forward to lower the cutting height or backward to raise the cutting height, engage the lever in the
desired cutting-height position on the mower deck. Refer to FIG 6.
INSTALLING/REMOVING THE BATTERY PACK (FIG 7)
To Install the Battery Pack
•
Lift and hold up the battery compartment cover.
• Align the battery pack with the mower’s battery port.
• Push the battery pack in and make sure it snaps in place and is fully seated and secured in the port.
NOTE: The mower requires two PLB14025 battery packs installed to work.
To Remove the Battery Pack
•
Lift and hold up the battery compartment cover.
• Press and hold the battery release button of the battery pack.
• Remove the battery pack from the battery port.