Use and Care Manual

1. Blade
2. Guard
3. Front Handle
4. Front Switch
5. Lock-Off Switch
6. Rear Switch
7. Battery Pack
8. Battery Locking Tab
9. Blade Cover
1
7
3
2
6
5
4
9
8
FIG 1
FIG 2
2
3
1
9
English
kNOWING YOUR HEDGE TRIMMER
ASSEMBLY AND ADJUSTMENTS
WARNING: Always be sure that the tool is switched off and the battery is
disconnected before adjusting, adding accessories, or checking a function on the tool.
INSTALLING OR REMOVING THE BATTERY PACK (FIG 2)
 The battery pack is not fully charged when it is purchased. Before using the hedge trimmer
for the first time, charge the battery pack. Make sure to read all safety precautions and follow the instructions in the
Charging Battery section.
WARNING: Always be sure that the tool
is switched off before insertion or removal of the
battery pack.
• Toinstallthebatterypack,slidethebatterypack
(1) into the bottom of the tool housing (2) all the
way until it locks in place with a click, as shown
in FIG 2. Lightly pull on the battery to ensure it is
locked into place and will not accidentally fall out
of the tool, causing an injury.
• Toremovethebatterypack,pullthebatterypack
away from the tool while depressing the battery
locking tab (3).

