Use and Care Manual
5
English
SPECIFIC SAFETY RULES FOR HEDGE TRIMMER
Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the switch is off when clearing jammed material. Blades coast after
turning them off. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
. Proper handling of the
hedge trimmer will reduce possible personal injury from the cutter blades.
, because the cutter blade may contact
hidden wiring or its own cord. Cutter blades contacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
DANGER – Keep hands away from blade. Contact with blade will result in serious personal injury.
Keep hands and feet away from the cutting device at all times and especially when switching the
product on.
Do not try to grasp or remove trimmings when the product is running. Only remove trimmings when the
product is switched off and disconnected from the power supply.
Never hold the product by the guard.
Always be sure of a safe and secure operating position, while using the product.
Never use the product standing on steps or a ladder. Do not work over shoulder height.
Always ensure the safety guard supplied is fitted before using the product. Never attempt to use an
incomplete product or one fitted with an unauthorized modification.
, and if damaged repair immediately.
Do not overload the product.
. Excessive vibration can cause
injury.
. Disconnect it from power supply (i.e.
remove the battery pack) and remove the blockage. Inspect the cutting device for damage before using the product
again.
Follow the maintenance and repair instructions for this product. Never carry out any modifications
of the product. Information about maintenance and repair is provided in this instruction manual.
Know how to stop the product quickly in an emergency.
Do not expose the product to rain. Do not operate the product on a wet hedge.
, e.g. wire fences. Take care that the cutting
device does not come into contact with wire or other metal objects.
if two handles are provided. Loss of control
can cause personal injury.