Use and Care Manual


English
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME EXPLANATION
V
Volts Voltage
A
Amperes Current
Hz
Herz Frequency (cycles per second)
W
Watts Power
/min.
Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Alternating Current Type of current
Direct Current Type of characteristic of current
Read the Operator’s Manual
To reduce the risk of injury, the user must read and under-
stand operator’s manual before using this product.
Wear Eye and Ear Protection
Always wear eye protection with side shields marked to
comply with ANSI Z87.1 along with hearing protection when
operating this equipment.
Safety Alert Precautions that concern your safety.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Operate With Two Hands Hold and operate the saw properly with both hands
Kickback
DANGER! BEWARE OF KICKBACK.
Bar Nose Contact Avoid bar nose contact
One Handed Do not operate the saw using only one hand.
Wear Gloves
Wear non-slip, heavy-duty protective gloves when handling
the chain saw
Wear Safety Footwear Wear non-slip safety footwear when using this equipment.
Keep Tool Away from Electrical Lines/
Keep Bystanders Away
DANGER! Risk of electrocution! Keep tool 50 feet away from
electrical lines. Keep all bystanders at least 50 ft. away or
twice the height of the largest trees in the felling area when
felling.