Full Product Manual

FIG 4

FIG 5

English

ASSEMBLY AND ADJUSTMENTS

INSTALLING OR REMOVING THE BATTERY PACK

 The battery pack is not fully charged when it is purchased. Before using the product for the

ﬁrst time, charge the battery pack. Make sure to read all safety precautions and follow the instructions in the Charging

Battery section.

WARNING: Always be sure that the product is switched off before insertion or

removal of the battery pack.

• Toinstallthebatterypack,slidethebatterypackintothebatteryholderattheendoftheproducthousingalltheway

until it locks in place with a click, as shown in Fig 4. Lightly pull on the battery to ensure it is locked into place and

will not accidentally fall out of the product.

• Toremovethebatterypack,pullthebatterypackawayfromtheproductwhiledepressingthebatterylockingtab

(6-Fig 1).

APPLICATIONS

You may use this product for the purposes listed below.

• Clearing leaves and yard debris from your lawn.

• Keeping decks, sidewalks and driveways free from leaves, debris and pine needles.

Before each use, inspect the entire product for damaged, missing, or loose parts such as screws, nuts, bolts, caps, etc.

Securely tighten all fasteners and caps and do not operate this product until all missing or damaged parts are replaced.

STARTING AND STOPPING THE BLOWER (FIG 5)

To Start the Blower, depress the trigger switch (2).

To Stop the Blower, release the trigger switch.

Speed Selector: Your blower is equipped with a speed selector (3). "I" is for the low air speed, "II" is for the high air

speed.

OPERATION