Use and Care Manual

ADJUSTING THE CUTTING HEIGHT

Warning! Cutting height adjustments should only be performed after the engine and blades

have come to a complete stop!

It is always best to begin cutting your lawn with a higher deck height to prevent scalping your lawn.

Rear wheel

The cutting height for the rear wheels is adjusted with a single lever.

Actuate the adjustment lever and pull it to the required position.

Please make sure that the lever locks into position.

Front wheel

The single front wheel must be adjusted to the same cutting height as the

rear wheels to ensure and even cut. Remove the axle bolt and adjust to the

desired height.

OPERATION

Cutting height adjustment lever

GAS AND OIL FILL-UP

The engine comes shipped without oil or gasoline. Be sure to add oil and gasoline before starting the

engine.

1. Add oil before starting mower for the first time.

2. Service the engine with gasoline as instructed.

Warning: Use extreme care when handling gasoline. Gasoline is extremely flammable and

its vapors are explosive. Never fuel the machine indoors or while the engine is hot or running.

Extinguish all cigarettes, cigars, pipes and other potential sources of ignition.

ADD OIL

The engine is shipped without oil. User must add the proper amount of oil before operating the engine for

the first time .The oil capacity of the engine crankcase is 18fl.oz. For general use (above 40 °F),we

recommend 30W,4-stroke engine oil.