Instructions / Assembly

FRONT HANDLE ADJUSTMENT

Press the angle adjusting buttons (A) on the front handle. (Fig. 4)

Adjust the front handle (B) to a comfortable angle.

Release the adjusting buttons and the handle will automatically reset

to lock position.

RAKE ADJUSTMENT

Rotate the rake knob (A) 90° anticlockwise and then the rake will

automatically pup-up. (Fig. 5A)

Lock the knob by rotating 90°clockwise.(Fig. 5B)

OPERATION INSTRUCTION

Starting the Blower/Vacuum/Mulcher

To start the Blower/Vacuum/Mulcher ensure that the Vacuum/Blower tube is fitted correctly and

attach the collection bag. Without the collection bag assembled, you cannot start the

Blower/Vacuum/Mulcher, since serious injury from the fan or flying debris could result.

WARNING: Before selecting either Vacuum or Blower function ensure that the selector

lever operates smoothly and that it is not obstructed by debris from the previous use.

Select either the Vacuum or Blower function using the selector lever on the side of the machine and

press the switch button .If more power is required, slide the speed controller from position 1 to

position max..

Stopping the Blower/Vacuum/Mulcher

To turn of the machine you can simply release the switch button.

Using the Blower/Vacuum/Mulcher

Do not attempt to pick up wet debris, allow fallen leaves etc., to dry out before using the

Blower/Vacuum/Mulcher. The Blower/Vacuum/Mulcher can be used to blow debris from patios,

paths, driveways, lawns, bushes and borders. It will also pick up leaves, paper, small twigs and wood

Fig. 4

Fig. 5A

Fig. 5B