Instructions / Assembly

WARNING! To avoid serious personal injury, read and understand all safety instructions

provided.

WARNING! Do not connect to power supply until assembly is complete. Failure to comply

could result in accidental starting and possible serious personal injury.

WARNING! Before performing any maintenance, make sure the tool is unplugged from the

power supply. Failure to heed this warning could result in serious personal injury.

INSTALLING THE BLOWER TUBE

 Slide the small tube (C) over the big tube (B) until the latch on the big tube is inserted into the end

of the opening on the small tube and locks into position (See fig.1)

 Align the widest end of the big tube (B) with the front opening on the blower (A). (See fig 2)

OPERATING INSTRUCTIONS

WARNING: Read and thoroughly understand all instructions and safety information before

operating this blower. Failure to do so may cause serious injury or death. Do not allow anyone

to operate this blower who has not read this manual. a blower can be dangerous if assembled or

used improperly. Do not operate this blower if you have doubts or questions concerning safe operation.

Call our customer service department at 1-800-791-9458 to address these concerns.

WARNING: Flying debris can cause serious personal injury to the operator, bystanders or

pets. Keep bystanders and pets at least 50ft away from the area of work and always wear

suitable eye and ear protection, long pants and sturdy shoes or boots while operating the tool.

CONNECTING TO A POWER SOURCE

Fig. 1

Fig. 2