Instructions / Assembly

13
TIPS
1. For best results, do not cut wet grass because it tends to stick to the cutting head and guard,
Prevents proper discharge of grass trimmings and could cause you to slip and fall.
2. Pay special attention when performing the work close to trees and bushes. The cutting head could
Damage sensitive bark, and damage fence posts.
FITTING AND REPLACING LINE SPOOL ASSEMBLY
WARNING:
Disconnect appliance from power supply before performing adjustments. Only fit line
spool recommended by the manufacturer.
The line spool is already fit with the string trimmer when out of package. You need to replace it with
new line when it’s used up.
 Replace the trimming spool when it is empty or worn.
 Turn the product over to access the trimming line.
 Hold the trimmer head steady with one hand. Press the latches on both
side of spool cover by another hand then pull it out of the spool.
 Remove the cover together with the trimming spool.
 Discard all trimming line on the spool.
 Clean the housing before inserting a new spool of the same type.
 Lead the trimming line endings through the eyelets of the spool cover.
 Press the two latches on the spool cover and refit the cover onto the
housing. Make sure the latches snap into its position to secure the cover.
 Ensure the cover is correctly fitted before releasing it. Otherwise, due to
spring action it may be ejected injuries.