Instructions / Assembly

8
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
The following signal words and meanings are intended to explain the levels of risk associated with this
product.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watts
Power
hrs
Hours
Time
Class II
Construction
Double-insulated construction.
Safety Alert
Precautions that involve your safety.
Read the user’s
manual
To reduce the risk of injury, user must read and understand user’s
manual before using this product.
Eye protection
Wear eye protection when operating this equipment.
Keep tool away
from electrical
lines/keep
bystanders away
DANGER! Risk of electrocution! Keep tool 50 feet away from
electrical lines. Keep all bystanders at least 50 ft. away.
Wet conditions alert
Do not expose to rain or use in damp locations.
Bar Nose Contact
Avoid bar nose contact.
No Hands Symbol
Failure to keep your hands away from the blade will result in serious
personal injury.
Operate With Two
Hands
Hold and operate the lopper saw properly with both hands.
Electric shock alert
Beware of electric shock hazard.