INSTRUCTION MANUAL 20V Cordless Drill Model # PS76430A Have product questions or need technical support? Please feel free to contact us! Website: www.Amerisuninc.com www.powersmartusa.com Toll free: 1-800-791-9458 M-F 9-5 EST Email: support@amerisuninc.
CONTENTS Technical data…...……………………………………………………... Introduction…….………………………………………………............ Safety information…….………………………………………………... General safety rules…….………………………………………………. Special safety rules for cordless drill.…………………………………. Symbols………………………………………………………………… Knowing your cordless drill...………….….……………………….…… Assembly instruction…………………………………………….………. Operating instruction…………………………………………………....... Maintenance……………………………………………………...………. Trouble shooting…………………………………………………….
INTRODUCTION Thank You for Purchasing a PowerSmart® Product. This manual provides information regarding the safe operation and maintenance of this product. Every effort has been made to ensure the accuracy of the information in this manual. PowerSmart® reserves the right to change this product and specifications at any time without prior notice. Please keep this manual available to all users during the entire life of the power tool.
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert, and knowing how your power tool works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: Do not operate this unit until you read this instruction manual for safety, operation and maintenance instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. WORK AREA SAFETY Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
POWER TOOL USE AND CARE Do not force power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it is designed. Do not use the power tool if switch does not turn it on or off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the power tool.
SPECIFIC SAFETY RULES FOR CORDLESS DRILL Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. (if supplied) Hold power tools by insulated gripping surfaces when performing an operation where the cutting tools may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL V A Hz W MIN NAME Volts Amperes Hertz Watts Minutes Safety Alert DESIGNATION/EXPLANATION Voltage Current Frequency (cycles per second) Power Time Precautions that involve your safety.
KNOWING YOUR CORDLESS DRILL 4 5 1 6 3 2 7 8 10 9 Fig.1 1. 2. 3. 4. 5. Chuck sleeve Adjustable clutch Scale ring Speed change lever Ventilation openings 6. 7. 8. 9. 10. Forward/Reversing lever & trigger lock Variable speed trigger switch Battery pack Belt hook Screw Unpacking Unpack the power tool and all its parts, and compare against the list below. Do not discard the carton or any packaging materials. Please call 1-800-791-9458 or E-mail us at support@amerisuninc.
ASSEMBLY INSTRUCTION WARNING: Do not use this product if any parts on the packing list are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced.
CONNECTING AND REMOVING BATTERY IMPORTANT! The battery pack is not charged when it is purchased. Before using the power tool for the first time, place the battery pack in the battery charger and charge. Make sure to read all safety precautions, and follow the instructions in the battery charger section. To install the battery pack To install the battery pack into the bottom of the handle, align the rails of the battery pack with the rails in the handle and push the battery into the handle.
ADJUSTABLE CLUTCH Your tool features 19 clutch settings. Output torque will increase as the clutch ring, is rotated from 1 to 18. The drill position will lock up the clutch to permit drilling and driving heavy duty work, and also enables bits to be changed quickly and easily in the keyless chuck. CAUTION: Before actual operation, drive a trial screw into your material or a piece of duplicate material to determine which torque level is required for a particular application.
Driving with variable speed Variable speed drills will double as a power screwdriver by using a screwdriver bit in the drill mode. The technique is to start slowly, increasing the speed as the screw runs down. Set the screw snugly by slowing to a stop. Prior to driving screws, pilot and clearance holes should be drilled. WARRNING: Make sure that the driver bit is inserted straight in the screw head, or the screw and / or bit may be damaged. Fastening with screws This procedure shown in (Fig.
Drilling metal There are two rules for drilling hard materials. First, the harder the material, the greater the pressure you need to apply to the tool. Second, the harder the material, the slower the speed. Here are a couple of tips for drilling in metal. Lubricate the tip of the bit occasionally with cutting oil except when drilling soft metals such as aluminum, copper or cast iron.
MAINTENANCE WARNING: In order to avoid personal injury and the risk of fire and electric shock, remove the battery pack before adjusting, inspecting, or cleaning the power tool. WARNING: When servicing, use only identical replacement parts. Use of any other parts could create a hazard or cause product damage. Be alert for battery packs that are nearing their end of life.
EXPLODED VIEW 16
PARTS LIST Item Stock# Description 1 PS76430A-01 Screw 1 5-19 PS76430A-05-19 2 PS76430A-02 Chuck 10MM 1 5-20 PS76430A-05-20 Description Second-planetary gear Second-sun gear 3 PS76430A-03 1 5-21 PS76430A-05-21 First-planetary gear 3 4 PS76430A-04 1 5-22 PS76430A-05-22 First-annular gear 1 5 PS76430A-05 Gear box 1 5-23 PS76430A-05-23 Middle shim 1 5-1 PS76430A-05-01 Circlips for shaft 1 6 PS76430A-06 Gear box cover 1 5-2 PS76430A-05-02 Steel ball shim 3 7 PS
TWO (2) YEARS LIMITED WARRANTY PowerSmart® is committed to building tools that are dependable for years. Our warranties are consistent with our commitment and dedication to quality. TWO (2) YEARS LIMITED WARRANTY OF POWERSMART PRODUCTS FOR HOME USE. PowerSmart (“Seller") warrants to the original purchaser only, that all PowerSmart consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
