INSTRUCTION MANUAL 20V Cordless 1/4 in. Impact Driver Model # PS76425 Have product questions or need technical support? Please feel free to contact us! Website: www.Amerisuninc.com. www.powersmartusa.com Toll free: 1-800-791-9458 M-F 9-5 EST Email: support@amerisuninc.
CONTENTS Technical data…...……………………………………………………... Introduction…….………………………………………………............. Safety information…….………………………………………………... General safety rules…….………………………………………………. Special safety rules for cordless impact driver.………………………… Symbols………………………………………………………………… Knowing your cordless impact driver.………….….…………………… Assembly instruction…………………………………………….……… Operating instruction………………………………………………….... Maintenance……………………………………………………...……... Trouble shooting……………………………………………………...
INTRODUCTION Thank You for Purchasing a PowerSmart® Product. This manual provides information regarding the safe operation and maintenance of this product. Every effort has been made to ensure the accuracy of the information in this manual. PowerSmart® reserves the right to change this product and specifications at any time without prior notice. Please keep this manual available to all users during the entire life of the power tool.
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert, and knowing how your power tool works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: Do not operate this unit until you read this instruction manual for safety, operation and maintenance instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. WORK AREA SAFETY Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
• If devices are provided for the connection of dust extraction and collection facilities, ensure theses are connected and properly used. Use of dust collection can reduce dust-related hazards. POWER TOOL USE AND CARE • Do not force power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it is designed. • Do not use the power tool if switch does not turn it on or off.
SPECIFIC SAFETY RULES FOR CORDLESS IMPACT DRIVER Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. (if supplied) Hold the tool firmly. Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. Always be sure you have a firm footing.
KNOWING YOUR CORDLESS IMPACT DRIVER Please use the illustration below to familiarize yourself with the location and function of the components that control of your chain saw. 5 1 2 4 3 6 8 9 7 Fig.1 1. 2. 3. 4. 9. 1/4 in. Drive chuck Control switch Switch trigger Lamp Screw 5. 6. 7. 8. Ventilation openings Handle Battery pack Belt hook Unpacking Unpack the power tool and all its parts, and compare against the list below. Do not discard the carton or any packaging materials.
ASSEMBLY INSTRUCTION WARNING: Do not use this product if any parts on the packing list are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced.
To remove the battery pack Press the battery release button ,Slide the battery pack backward, and then pull or lift the battery out of the tool . • • • WARNING: Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire: Replace the battery pack or the charger immediately if the battery case or charger cord is damaged. Verify that the battery pack is removed before inspecting, adjusting, or performing maintenance on any part of the power tool.
OPERATING TIPS Hold the tool firmly and place the point of the driver bit in the screw head. Apply forward pressure to the tool to the extent that the bit will not slip off the screw and turn the tool on to start operation. CAUTION: • Use the proper bit for the head of the screw/bolt that you wish to use. • Hold the tool pointed straight at the screw.
MAINTENANCE WARNING: In order to avoid personal injury and the risk of fire and electric shock, remove the battery pack before adjusting, inspecting, or cleaning the power tool. WARNING: When servicing, use only identical replacement parts. Use of any other parts could create a hazard or cause product damage. • • • • Be alert for battery packs that are nearing their end of life.
EXPLODED VIEW 13
PARTS LIST Item Stock# Description Qty Item Stock# Description Qty 1 2 2.1 2.2 2.3 3 4 4.1 4.2 4.3 4.4 4.5 4.6 5 5.1 5.2 5.3 5.4 5.5 5.
TWO (2) YEARS LIMITED WARRANTY PowerSmart® is committed to building tools that are dependable for years. Our warranties are consistent with our commitment and dedication to quality. TWO (2) YEARS LIMITED WARRANTY OF POWERSMART PRODUCTS FOR HOME USE. PowerSmart (“Seller") warrants to the original purchaser only, that all PowerSmart consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
