INSTRUCTION MANUAL 20 V Cordless Reciprocating Saw Model # PS76415 Have product questions or need technical support? Please feel free to contact us! Website: www.Amerisuninc.com. www.powersmartusa.com Toll free: 1-800-791-9458 M-F 9-5 EST Email: support@amerisuninc.
CONTENTS Technical data…...……………………………………………………... Introduction…………………………………………………………….. Safety information……………………………………………………… General safety rules…….……………………………………………….. Special safety rules for cordless reciprocating saw…………………….. Symbols………………………………………………………………… Knowing your cordless reciprocating saw..………….….……………… Assembly instruction…………………………………………….………. Operating instruction…………………………………………………....... Maintenance……………………………………………………..……….. Trouble shooting………………………………………………………….
INTRODUCTION Thank You for Purchasing a PowerSmart® Product. This manual provides information regarding the safe operation and maintenance of this product. Every effort has been made to ensure the accuracy of the information in this manual. PowerSmart® reserves the right to change this product and specifications at any time without prior notice. Please keep this manual available to all users during the entire life of the power tool.
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert, and knowing how your power tool works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: Do not operate this unit until you read this instruction manual for safety, operation and maintenance instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. WORK AREA SAFETY Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
POWER TOOL USE AND CARE • Do not force power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it is designed. • Do not use the power tool if switch does not turn it on or off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. • Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the power tool.
Always wear eye protection with side shields marked to comply with ANSI Z87.1. Following this rule will reduce the risk of serious personal injury. Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury. Protect your hearing. Wear hearing protection during extended periods of operation. Following this rule will reduce the risk of serious personal injury. Save these instructions.
KNOWING YOUR CORDLESS RECIPROCATING SAW 4 2 1 5 3 6 Fig.1 1. Saw blade 2. Locking sleeve 3. Saw frame 4. Lock-off button 5. On/Off Switch 6. Battery pack Unpacking Unpack the power tool and all its parts, and compare against the list below. Do not discard the carton or any packaging materials. Please call 1-800-791-91458 or E-mail us at support@amerisuninc.com if any parts are damaged or missing.
ASSEMBLY INSTRUCTION WARNING: Do not use this product if any parts on the packing list are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced.
CONNECTING AND REMOVING BATTERY IMPORTANT! The battery pack is not charged when it is purchased. Before using the power tool for the first time, place the battery pack in the battery charger and charge. Make sure to read all safety precautions, and follow the instructions in the battery charger section. To install the battery pack To install the battery pack into the bottom of the handle, align the rails of the battery pack with the rails in the handle and push the battery into the handle.
CUTTING TIPS • • WARNING: • Before any work on the machine itself, remove the battery from the power tool. There is danger of injury when unintentionally actuating the On/Off switch. When sawing light building materials, observe the statutory provisions and recommendations of the material suppliers. Check the wood, press boards, building materials, etc. for foreign objects such as nails, screws or similar, and remove them, if required. If the saw blade should jam, switch the machine off immediately.
• • • • • • • Press down on the battery pack to be sure contacts on the battery pack engage properly with contacts in the charger. Latches should snap into ensure charger is correctly connected. Do not place the charger in an area of extreme heat or cold. It will work best at normal room temperature. The battery pack may become slightly warm to the touch while charging. This is normal and does not indicate a problem. The red LEDs will remain on while charging.
EXPLODED VIEW 43 45 44 13
PARTS LIST Item 1 Stock# PS76415-001 Description Ring 16 Qty 1 2 PS76415-002 Out ring 3 PS76415-003 4 Item 24 Stock# PS76415-024 Description Bearing 606-2Z Qty 1 1 25 PS76415-025 Small gear 1 Ball 2 26 PS76415-026 Motor 1 PS76415-004 Inner ring 1 27 PS76415-027 Screw ST2.9x1 2 4 5 PS76415-005 Pin 1 28 PS76415-028 Cover 1 6 PS76415-006 Torsional spring 1 29 PS76415-029 Cover 1 7 PS76415-007 Plastic ring 1 30 PS76415-030 Screw ST4.
TWO (2) YEARS LIMITED WARRANTY PowerSmart® is committed to building tools that are dependable for years. Our warranties are consistent with our commitment and dedication to quality. TWO (2) YEARS LIMITED WARRANTY OF POWERSMART PRODUCTS FOR HOME USE. PowerSmart (“Seller") warrants to the original purchaser only, that all PowerSmart consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
