Instructions / Assembly

 Now push the upper handle bar over the lower bar.

Install the handles together, using the bolts and cam lock supplied. then tighten the upper handle

with the cam locks on both sides.

Then attach the power cable to the handle bar using the cable clips.

Installing the grass collector

Lift the rear chute cover (A) with one handle. With the other handle, hold the grass collector by the

handle and hook it on the unit as shown in fig.3-4

Installing the battery pack (see fig.5-8)



Lift and hold up the battery door (see fig.5).



Place the battery pack on the mower. Align guided ribs on battery pack with grooves in the

product’s battery port (see fig.6).

NOTE: Make sure the battery pack is fully seated and secure in the product before beginning

operation.



Insert the key (see fig.7).



If the machine is not going to be used immediately, do not insert the key.



Close the door (see fig.8).

To remove battery pack (see fig.5-8)



Release the power lever to stop the product.



Remove the key.

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8