Instructions / Assembly

CONNECTING AND REMOVING BATTERY

IMPORTANT!

The battery pack is not charged when it is purchased. Before using the string trimmer for the first time,

place the battery pack in the battery charger and charge. Make sure to read all safety precautions, and

follow the instructions in the battery charger section.

To remove the battery pack

 Press the button (1) on the handle ,Slide the battery pack

backward, and then pull or lift the battery out of the tool (see

fig 7).

To install the battery pack

To install the battery pack into the tool, align the rails of the battery pack with the rails in the tool and

push the battery into the housing. To connect the battery, slide the battery pack fully forward. Until the

latch locks into place.

WARNING:

Follow these instructions in order to avoid injury and to reduce the risk of electric shock or

fire:

 Replace the battery pack or the charger immediately if the battery case or charger cord is

damaged.

 Verify that the battery pack is removed before inspecting, adjusting, or performing maintenance on

any part of the string trimmer.

 Read, understand, and follow the instructions.

Fig. 7