Instructions / Assembly

8
• Use extreme caution when cutting small-sized brush and saplings because slender material may catch
the saw chain and be whipped toward you or pull you off balance.
• When cutting a limb that is under tension, be alert for spring back so that you will not be struck when
the tension in the wood fibers is released.
• To avoid accidental starting, never carry plugged in product with finger on switch. Be sure switch is off
when plugging in.
• Maintain product with care. Keep cutting edge sharp and clean for best performance and to reduce the
risk of injury. Follow this instruction for lubricating and changing accessories. Inspect cord
periodically and, if damaged, have it repaired by an authorized service facility. Inspect extension cords
periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.
• Remove the battery pack when not in use, before servicing, and when changing accessories.
• Service on the product must be performed by qualified repair personal only. Service or maintenance
performed by unqualified personal could result in injury to the user or damage to the product.
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watts
Power
hrs
Hours
Time
Safety Alert
Precautions that involve your safety.
Read the user’s
manual
To reduce the risk of injury, user must read and understand user’s
manual before using this product.
Ear protection
Wear ear protection when operating this equipment.
Eye protection
Wear eye protection when operating this equipment.
Keep tool away
from electrical
lines/keep
bystanders away
DANGER! Risk of electrocution! Keep tool 50 feet away from
electrical lines. Keep all bystanders at least 50 ft. away.