Instructions / Assembly
17
TROUBLE SHOOTING
The following form lists the common operating system with problem and solutions. Please read the form 
carefully and follow it.
PROBLEMS POSSIBLE CAUSES SOLUTION
Motor fails to start when 
switch trigger is 
depressed.
Check battery charger 
Check power button
Recharge
Push button.
Line will not feed Check spool 
Replace spool
1. Check line is not tangled or jammed in 
the spool.
2.Remove the line and replace the spool 
of the line and ensure the mechanism is 
clean.
Poor cutting performance Check the cutting line 
1. Check the cutting line is fully 
extended.
If not:
2. Manually extend the line or stop and 
start the trimmer until the line has 
been extended to the line cutter.
3.Make smaller cuts, This is a light 
duty trimmer.
4.Ensure line is fully extended.










