Instructions / Assembly

¾ Replace the battery pack or the charger immediately if the battery case or charger cord is

damaged.

¾ Verify that the battery pack is removed before inspecting, adjusting, or performing maintenance on

any part of the string trimmer.

¾ Read, understand, and follow the instructions.

OPERATING INSTRUCTIONS

WARNING: Read and thoroughly understand all instructions and safety information before

operating this string trimmer. Failure to do so may cause serious injury or death. Do not allow

anyone to operate this string trimmer who has not read this manual. a string trimmer can be

dangerous if assembled or used improperly. Do not operate this string trimmer if you have doubts or

questions concerning safe operation. Call our customer service department at 1-800-791-9458 to address

these concerns.

STARTING/STOPPING THE STRING TRIMMER

¾ Install the battery pack. (Refer to Installing the battery pack)

¾ Depress the lock off button (1) and at the same time press the

trigger switch (2). (See fig. 8)

¾ To switch off, release the trigger switch.

WARNING:

The tool runs for approximately 4 seconds after it has been switched off. Let the motor come

to a complete standstill before setting the tool down.

TRIMMING FUNCTION

1. Adjusting the cutting height

WARNING:

Do not try to adjust the telescopic shaft while the trimming line is rotating.

¾ Unscrew the lock sleeve on the shaft and adjust the length of the

telescopic shaft (K) to the most comfortable operation position. See

fig 9. Turn the lock sleeve anti-clockwise to lock the shaft in

position.

2. Adjusting the front handle

WARNING:

Remove the battery from string trimmer before performing adjustments.

Fig. 8

Fig. 9