Instructions / Assembly
12
MAINTENANCE
WARNING:
In order to avoid personal injury and the risk of fire and electric shock, remove the battery
pack before adjusting, inspecting, or cleaning the blower.
CLEANING
Remove the battery pack.
¾ Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep the air
vents free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse the air vents in
water.
¾ Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong solvents
or detergents on the plastic housing or plastic components. Certain household cleaners may cause
damage, and may cause a shock hazard.
BATTERY PACK
¾ Store the battery pack fully charged.
¾ Once the charging light turns green, remove the battery from the charger and disconnect the charger
from the outlet.
¾ Do not store the battery pack on the tool.
¾ After charging, the battery pack may be stored in the charger, as long as the charger is not plugged in.
CHARGER MAINTENANCE
¾ Keep the charger clean and clear of debris. Do not allow foreign material to get into the recessed
cavity or onto the contacts. Wipe the charger clean with a dry cloth. Do not use solvents or water, and
do not place the charger in wet conditions.
¾ Unplug the charger when there is no battery pack in it.
¾ Fully charge the batteries before placing them in storage.
¾ Store the charger at normal room temperature. Do not store it in excessive heat. Do not use the
charger in direct sunlight. Recharge at room temperature between Û)DQGÛ). If the battery
pack is hot, allow it to cool down before recharging.
ENVIRONMENTALLY SAFE BATTERY DISPOSAL