INSTRUCTION MANUAL 18V Lithium-Ion Cordless Blower Model # PS76101A Have product questions or need technical support? Please feel free to contact us! Website: www.Amerisuninc.com Toll free: 1-800-791-9458 M-F 9-5 EST Email: support@amerisuninc.
CONTENTS Technical data…...………………………………………………………... General safety rules…….………………………………………………... Symbols………………………………………………………………….. Knowing your blower……. ..…………………………………………… Assembly instruction……………………………………………………… Operating instruction…………………………………………………...... Maintenance.……………………………………………………………… Environmentally safe battery disposal……………………………………... Troubleshooting………………………………………………………….
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert, and knowing how your blower works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: Do not operate this unit until you read this instruction manual for safety, operation and maintenance instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. ¾ Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
¾ Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or medication. ¾ Keep all parts of your body away from any moving parts and all hot surfaces of the unit. ¾ Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow. ¾ Check the work area before each use.
vinegar. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury. ¾ If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk. ¾ Do not point the blower nozzle in the direction of people or pets. ¾ Never run the unit without the proper equipment attached. Always ensure the sweeper tubes are installed.
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL V A Hz W min NAME Volts Amperes Hertz Watts Minutes Safety Alert DESIGNATION/EXPLANATION Voltage Current Frequency (cycles per second) Power Time Precautions that involve your safety.
SYMBOL SIGNAL MEANING DANGER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. CAUTION (Without Safety Alert Symbol) Indicates a situation that may result in property damage.
KNOWING YOUR BLOWER B C E A D A C E Blower small tube On/Off trigger switch Blower big tube B D Lock off button Battery pack Unpacking Unpack the blower and all its parts, and compare against the list below. Do not discard the carton or any packaging materials. Please call 1-800-791-91458 or E-mail us at support@amerisuninc.com if any parts are damaged or missing.
INSTALLING THE BLOWER TUBE CAUTION: Always ensure that the tool is switched off and the battery is removed before making any adjustments or maintenance procedures. ¾ Slide the small tube (C) over the big tube (B) until the latch on the big tube is inserted into the end of the opening on the small tube and locks into position (see fig.1) ¾ Align the widest end of the big tube (B) with the front opening on the blower (A). (see fig 2) Fig. 1 C B Fig.
To install the battery pack into the tool, align the rails of the battery pack with the rails in the tool and push the battery into the handle. To connect the battery, slide the battery pack fully forward. Until the latch locks into place. WARNING: Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire: ¾ Replace the battery pack or the charger immediately if the battery case or charger cord is damaged.
MAINTENANCE WARNING: In order to avoid personal injury and the risk of fire and electric shock, remove the battery pack before adjusting, inspecting, or cleaning the blower. CLEANING Remove the battery pack. ¾ Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep the air vents free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse the air vents in water. ¾ Wipe off the housing and the plastic components using a moist, soft cloth.
The batteries used in this blower's battery pack contain the following toxic and corrosive material: LITHIUM-ION. WARNING: Toxic materials must be disposed of in a specified manner in order to prevent contamination of the environment. Before disposing of damaged or worn out Lithium-Ion battery packs, contact your local waste disposal agency for information and specific instructions. Take the batteries to a local recycling and/or disposal centre that is certified for disposal.
TROUBLE SHOOTING The following form lists the common operating system with problem and solutions. Please read the form carefully and follow it. PROBLEMS POSSIBLE CAUSES Battery is not secure. SOLUTION To secure the battery pack, make sure the latches on the top of the battery pack snap into place. Battery is not charged. Charge the battery pack according to the Instruction included with your model. Unit will not start Defective power switch.
Item Stock# Description QTY 1 PS76101A-001 left front cover 1 2 PS76101A-002 left housing 1 3 PS76101A-003 motor 1 4 PS76101A-004 motor retaining plate 1 5 PS76101A-005 shock pad 4 6 PS76101A-006 screw ST4x10 2 7 PS76101A-007 fan 1 8 PS76101A-009 button spring 1 9 PS76101A-010 switch button 1 10 PS76101A-011 un-locked button spring 1 11 PS76101A-012 un-locked button 1 12 PS76101A-013 lead wire 1 13 PS76101A-014 switch 1 14 PS76101A-015 18V battery 1.
PowerSmart® is committed to building tools that are dependable for years. Our warranties are consistent with our commitment and dedication to quality. TWO (2) YEARS LIMITED WARRANTY OF POWER SMART PRODUCTS FOR HOME USE. PowerSmart (“Seller") warrants to the original purchaser only, that all PowerSmart consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
INSTRUCTION MANUAL 18V Lithium-Ion Cordless String Trimmer Model # PS76110A Have product questions or need technical support? Please feel free to contact us! Website: www.Amerisuninc.com Toll free: 1-800-791-9458 M-F 9-5 EST Email: support@amerisuninc.
2
CONTENTS Technical data…...………………………………………………………... General safety rules…….………………………………………………... Symbols………………………………………………………………….. Knowing your string trimmer……. ..…………………………………… Assembly instruction……………………………………………………… Operating instruction…………………………………………………...... Maintenance.……………………………………………………………… Environmentally safe battery disposal……………………………………... Troubleshooting………………………………………………………….
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert, and knowing how your string trimmer works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: Do not operate this unit until you read this instruction manual for safety, operation and maintenance instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. ¾ Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
¾ Keep all parts of your body away from any moving parts and all hot surfaces of the unit. ¾ Check the work area before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the machine. ¾ Use only identical manufacturer’s replacement parts and accessories. Use of any other parts may create a hazard or cause product damage. ¾ Do not charge battery tool in rain, or damp or wet location.
¾ When not in use, string trimmer should be stored indoors in a dry, locked up place- out of the reach of children. ¾ Maintain tool with care. Keep the string trimmer clean for best and safest performance. Follow instructions for proper maintenance. Do not attempt to clear clogs from tool without first removing the battery. ¾ To reduce the risk of electrical shock, do not expose to rain, do not use on wet surfaces. Store indoors. ¾ Save these instructions.
SYMBOL V A Hz W min NAME Volts Amperes Hertz Watts Minutes Safety Alert DESIGNATION/EXPLANATION Voltage Current Frequency (cycles per second) Power Time Precautions that involve your safety. Read the user’s manual To reduce the risk of injury, user must read and understand user’s manual before using this product. Eye protection Wear eye protection when operating this equipment. Wet conditions alert Do not expose to rain or use in damp locations.
SYMBOL SIGNAL MEANING DANGER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. CAUTION (Without Safety Alert Symbol) Indicates a situation that may result in property damage.
KNOWING YOUR STRING TRIMMER B C A D E J K F G H I L A C E G I Trigger switch Front handle Shaft adjustment lock Edger wheel Guard B D F H J K Telescopic shaft L Lock off button Edger function switch Motor housing Protector Front handle adjustment button Spool and line assembly Unpacking Unpack the string trimmer and all its parts, and compare against the list below. Do not discard the carton or any packaging materials. Please call 1-800-791-91458 or E-mail us at support@amerisuninc.
WARNING: Do not use this product if any parts on the packing list are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced.
package (see fig 3) Fig. 3 ¾ When in edging mode, the edging wheel ( G ) needs to be fit on the trimmer. Insert the edging wheel into the black slot piece on the motor housing ( F) .(See fig4). Make sure the edging wheel is firmly connects with slot. And push the protector ( H ) to make it not protrude (see fig 5). Fig. 5 Fig. 4 CONNECTING AND REMOVING BATTERY IMPORTANT! The battery pack is not charged when it is purchased.
¾ Replace the battery pack or the charger immediately if the battery case or charger cord is damaged. ¾ Verify that the battery pack is removed before inspecting, adjusting, or performing maintenance on any part of the string trimmer. ¾ Read, understand, and follow the instructions. OPERATING INSTRUCTIONS WARNING: Read and thoroughly understand all instructions and safety information before operating this string trimmer. Failure to do so may cause serious injury or death.
¾ While grip the adjustment button ( J ) on front handle ( C ) tightly and turn it with downward direction (See fig 10), push the front handle down until the desired angle is set. Then release the adjustment button on front handle. Fig. 10 ¾ There are 5 angles for you to choose the preferred one. Note: there’s a downward arrow marked on this handle. You can follow the direction of the arrow to adjust the angle. See 11 3. Adjusting the angle of motor housing Fig.
1. Lower the protector to prevent the motor housing from getting too close to an object such as a tree trunk or wall and causing damage to the trimming spool. 2. Start the trimmer before approaching the grass to be cut. 3. Cut the grass by moving the trimmer from right to left and proceed slowly keep the trimmer inclined forwards at an angle of about 30Ϩ light cuts are better than heavy cuts as they allow the cut grass to fall away from the motor housing. 4.
Remove the battery pack. ¾ Stop the motor and remove the battery pack. ¾ Clean dirt and debris from the spool head using a damp cloth with a mild detergent. NOTE: Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong solvents or detergents on the plastic housing or plastic components. Certain household cleaners may cause damage, and may cause a shock hazard. GENERAL INSPECTION Regularly check that all the fixing screws are tight. They may vibrate loose over time.
of the environment. Before disposing of damaged or worn out Lithium-Ion battery packs, contact your local waste disposal agency for information and specific instructions. Take the batteries to a local recycling and/or disposal centre that is certified for disposal. If the battery pack cracks or breaks, whether it leaks or not, do not recharge it and do not use it. Dispose of it and replace it with a new battery pack.
TROUBLE SHOOTING The following form lists the common operating system with problem and solutions. Please read the form carefully and follow it. PROBLEMS Motor fails to start when switch trigger is depressed. POSSIBLE CAUSES Check battery charger Check power button Line will not feed Check spool Replace spool Poor cutting performance SOLUTION Recharge Push button. 1. Check line is not tangled or jammed in the spool. 2.Remove the line and replace the spool of the line and ensure the mechanism is clean.
EXPLODED VIEW & PARTS LIST 18
Item Stock# Description QTY 1 PS76110A-001 Left rear handle 1 2 PS76110A-002 Button 3 PS76110A-003 4 5 Item Stock# 1 32 PS76110A-032 Screw 5 Spring 1 33 PS76110A-033 Screw ST4x12 1 PS76110A-004 Handle button 1 34 PS76110A-034 Spring 1 PS76110A-005 Front handle 1 35 PS76110A-035 1 6 PS76110A-006 Spring wire 1 36 PS76110A-036 Revolve button joint slider block 7 PS76110A-007 Wheel 2 37 PS76110A-037 Micro switch 1 8 PS76110A-008 Circlip 6 1 38 PS76110A
PowerSmart® is committed to building tools that are dependable for years. Our warranties are consistent with our commitment and dedication to quality. TWO (2) YEARS LIMITED WARRANTY OF POWER SMART PRODUCTS FOR HOME USE. PowerSmart (“Seller") warrants to the original purchaser only, that all PowerSmart consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
