Instructions / Assembly

6. Screw the spark plug back into the spark plug hole using the spark plug wrench. Do not over-tighten

spark plug. Recommended tightening of spark plug is ½ to ¾ of a turn after spark plug gasket contacts

spark plug hole. Reinstall the spark plug boot.

DRAINING THE FUEL TANK

Clean fuel tank each year or before storing the generator for extended periods of time. To drain the fuel

tank and carburetor:

1. Turn the fuel valve to the “OFF” position.

2. Remove the fuel line between the fuel valve and carburetor. Caution: A small amount of fuel may

leak from the hose during removal.

3. Attach a fuel line (not included with the generator) to the exposed end of the fuel valve.

4. Position fuel line into an appropriate container and open the fuel valve allowing fuel to flow into the

container.

5. Once fuel is drained, shut off the fuel valve.

6. Start and run the engine until fuel runs out.

7. Remove the fuel valve cup (See “FUEL VALVE CUP CLEANING”).

8. Empty the fuel valve cup of any fuel and clean.

9. Reinstall the fuel valve cup.

10. Store the emptied gasoline in a suitable place.

CAUTION: Do not store fuel for more than 3 months.