Use and Care Manual

KNOWING YOUR ELECTRIC RECIPROCATING SAW

ASSEMBLY INSTRUCTION

This package contains:

1 hex key

1 metal cutting blade

1 wood cutting blade

Check for damage to the tool, parts or accessories which may have occurred during transport. Take the

time to thoroughly read and understand this manual prior to operation.

To install cutting blade

1. Unplug power cord first.

2. Aim blade at Blade Clamp then insert blade with teeth facing up or down as needed.

3. Tighten the screw with hex key wrench.

4. Pull on blade to make sure it is securely fastened.

5. Plug in power cord to operate tool.

6. Operate the contrary to the above steps to disassemble blade.

WARNING! Before plugging in power cord, always pull on the blade to make sure it is

securely locked in the clamp. Failure to do so may result in serious injury.

Power switch

Lock-on button

Blade clamp

Bracket