INSTRUCTION MANUAL Electric Reciprocating Saw Model # PS4010 Have product questions or need technical support? Please feel free to contact us! Website: www.Amerisuninc.com Toll free: 1-800-791-9458 M-F 9-5 EST Email: support@amerisuninc.
CONTENTS Technical data…...……………………………………………………... General safety rules…….……………………………………………….... Electrical information…………………………………………………… Knowing your electric Reciprocating Saw.………….….……………… Assembly instruction…………………………………………….………. Operating instruction…………………………………………………....... Maintenance……………………………………………………..……….. Exploded view…………………………………………………………… Parts list…………………………………………………………………... Warranty………………………………………………………………….
GENERAL SAFETY RULES WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. . SAVE THESE INSTRUCTIONS. Work Area Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• • • • • Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. Remove adjusting keys or switches before turning the tool on.
ELECTRICAL INFORMATION Guidelines for using extension cords When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gauge number, the heavier the cord.
KNOWING YOUR ELECTRIC RECIPROCATING SAW 1 3 Power switch Blade clamp 2 4 Lock-on button Bracket ASSEMBLY INSTRUCTION This package contains: 1 hex key 1 metal cutting blade 1 wood cutting blade Check for damage to the tool, parts or accessories which may have occurred during transport. Take the time to thoroughly read and understand this manual prior to operation. To install cutting blade 1. Unplug power cord first. 2. Aim blade at Blade Clamp then insert blade with teeth facing up or down as needed.
OPERATION INSTRUCTION Power Switch and lock-on Button: To start saw, squeeze Power Switch with finger. More switch travel will achieve higher speeds. The maximum speed can be adjusted with the Variable Speed Switch. To maintain a certain speed, follow the previous instruction and engage the lock on Button. To disengage Lock-on Button, simply squeeze the Power Switch to release. General Cutting Hold your saw firmly in front and clearly away from you.
Metal Cutting When cutting metallic material with this tool, be sure to use a sharp blade designed for this purpose. We recommend lubricating the cutting surface with cutting oil to avoid heat buildup. Follow general cutting procedure on previous page. Do not force tool. Use only enough pressure to keep the saw cutting. MAINTENANCE • WARNING. Do not allow brake-fluids, gasoline, petroleum-based products penetrating oils, etc. Come in contact with plastic parts.
EXPLODED VIEW 10
PARTS LIST Item Stock# 1 PS4010-001 2 Description Qty Item Stock# Circlip for shaft 16 1 32 PS4010-032 PS4010-002 Outer ring 1 33 PS4010-033 3 PS4010-003 Pin 1 34 4 PS4010-004 Inner ring 1 5 PS4010-005 Steel ball 5.2 6 PS4010-006 7 Description Qty 1 PS4010-034 Washer 6×14×1.
TWO (2) YEARS LIMITED WARRANTY Power Smart® is committed to building tools that are dependable for years. Our warranties are consistent with our commitment and dedication to quality. TWO (2) YEARS LIMITED WARRANTY OF POWER SMART PRODUCTS FOR HOME USE. Power Smart (“Seller") warrants to the original purchaser only, that all Power Smart consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
