Instructions / Assembly

MAINTENANCE

Cleaning

To keep your Wet/Dry vacuum looking its best, clean the outside with a cloth dampened with warm water

and mild soap.

To clean the drum:

1. Dump debris out.

2. Wash drum thoroughly with warm water and mild soap.

3. Wipe out with dry cloth.

Cleaning A Dry Filter

NOTE: For best cleaning results due to accumulated dust, clean the filter in an open area. Cleaning

SHOULD be done outdoors and not in the living quarters.

Remove filter from Vac. Gently tap filter against the inside wall of your dust drum. The debris will loosen

and fall.

Cleaning A Wet Filter

After filter is removed, run water through the filter from a hose or spigot. Take care that water pressure

from the hose is not strong enough to damage filter.

Storage

Before storing your Vac, the drum should be emptied and cleaned. The cord should be wrapped around

the unit and the hose should be stored as described in this manual. Accessories should be kept in the same

area as the Vac so they can be readily available. The Vac should be stored indoors.