Instructions / Assembly

5
SPECIFIC SAFETY RULES FOR PRSSURE WASHER
WARNING: Do not operate your pressure washer until it is completely assembled and
installed according to the instructions.
It is very important to bleed the gun before using the pressure washer. Squeeze the trigger to allow any air
that is trapped inside of the unit and hose to escape. Continue to squeeze trigger until a steady stream of
water comes from the nozzle.
Keep operating area clear off all persons.
Before each use pressure must be released! Trigger on wand then start the washer.
Do not overreach or stand on unstable support. Keep good footing and balance at all times.
Follow the maintenance instructions specified in the manual.
To reduce the risk of electrocution, don’t start and run the machine in the rain or storm. Keep all
connections dry and off the ground. Do not touch plug with wet hands. It is strictly prohibited to let water
leak into the machine.
When the machine is turned on, the interior pumps start and continue to run even if the pressure wand
trigger has not been depressed. Running the machine for more than 3 minutes without depressing the
pressure wand trigger could cause heat damage to the motor and pumps, please do not leave the machine
running unattended or unused for more than 3 minutes.
When the machine is running, please maintain a constant water supply. Without water circulation will
damage the sealing rings of the machine.
It is necessary to turn on the spray lance within one or two minutes after the machine has been started.
Otherwise, the temperature of the circulating water within the machine will soon rise to a critical point,
which will cause damage to the sealing rings inside the machine.
Don’t start and run the machine in a place excessively cold so as to prevent the machine from freezing.
This appliance has been designed for only using cleaning water, do not use corrosive chemicals.
Do not use the appliance within the range of people
Do not direct the jet against yourself or others in order to clean clothes or footwear.
Disconnect from the electrical power supply before carrying out user maintenance.
To ensure the appliance safety to please use only original spare parts from the manufacturer or approved
by the manufacturer. Do not use the machine before you change them if they are damaged.
WARNING: Do not expose to rain or use in damp locations.