Instructions / Assembly

12
Storage
CAUTION! Always store your pressure washer in a location where the temperature will not
fall below 32ºF (0ºC). The pump in this machine is susceptible to permanent damage
if it freezes. FREEZE DAMAGE IS NOT COVERED BY THE WARRANTY.
Store the pressure washer indoors in a dry, covered area where it is not subject to adverse weather
conditions.
It is important to store this product in a frost-free area.
Always empty water from all hoses, the pump, and the detergent tank before storing.
CAUTION! The use of a pump protector is recommended to prevent cold weather damage
during storage over the winter months.
Winterizing and long-term storage
If you must store your pressure washer in a location where the temperature falls below 32ºF, you can
minimize the chance of damage to your machine by utilizing the following procedure:
1. Disconnect all water connections.
2. Turn on the machine for a few seconds until the remaining water in the pump exits. Turn off
immediately.
3. Do not allow the high-pressure hose to become kinked.
4. Store the machine and accessories in a room that does not reach freezing temperatures.
5. Do not store near a furnace or other sources of heat that may dry out the pump seals.
6. Operate the pressure washer with non-corrosive/non-toxic anti-freeze, a pump saver, or a pump
protector before storing for the winter.
WARNING! Before reusing, completely flush the unit with clear water. Anti-freeze products
can damage paintwork, so you must ensure there is no anti-freeze left in the system before
using it again.