Instructions / Assembly

11
OPERATION (CONTINUED)
1. Rinse with clean water under high pressure. When working on a vertical surface, rinse from the
bottom up, then rinse from the top down to avoid streaking. Hold the nozzle 6-8 inches away from
the work surface at a 45° angle.
2. When you have finished using the detergent injection system, refill it into fresh water. Siphon
water at low pressure for one minute so that all the detergent is flushed through the system.
CAUTION! Failure to follow these cleaning instructions will cause the injection system to
become clogged and inoperable.
Shutting down
1. Turn the switch to the OFF position and unplug the power cord from the outlet.
2. Turn off the water source.
3. Hold the trigger to release water pressure.
4. Disconnect the garden hose from the water inlet on the unit.
5. Disconnect the high-pressure hose connection on the trigger gun handle.
6. Release the trigger and engage the gun safety lock.
WARNING! Turn off the water supply and squeeze the trigger to depressurize the unit. Failure
to do so could result in personal injury due to discharge of high-pressure water.