Instructions / Assembly

22
TRANSPORT&STORAGE
CAUTION: Never place any type of storage cover or tarp on the machine while it is still hot.
NOTICE: Do not incline the engine so as to avoid fuel’s spill. Spilled fuel or fuel vapor may ignite to
cause fire.
If the engine is not kept in use for a long time, be sure to store it properly.
1. Make sure the storage area is dry and free of dust.
2. Turn the fuel cock to “OFF” position, set a proper container under the
carburetor.
3. Open the fuel cock to completely train gasoline out of the fuel tank.
4. Reinstall the oil drain plug back and tighten it.
5. Drain the oil out of the gasoline engine.
6. Remove the spark plug. Fill about a spoon of fresh engine oil onto the
cylinder. Crank the engine up to distribute engine oil evenly. Reinstall
the spark plug.
7. Cover the engine to protect dust entering.
Please maintain according to following table when reuse after storing.
Storing time
Maintaining procedure is commended in order to prevent starting
difficult.
1 month Don’t need to prepare.
1-2 month Drain the used gasoline out and add the fresh gasoline.
2 months to 1 year
Drain the used gasoline out and add the fresh gasoline
①Drain the gasoline out of the carburetor cup.
②Drain the gasoline out of the sediment bowl.
1 year over
Drain the used gasoline out and add the fresh gasoline
①Drain the gasoline out of the carburetor cup.
②Drain the gasoline out of the sediment bowl.
After removing out of the storage, first, drain the used gasoline to
proper container, and don’t start before adding fresh gasoline.
Loosen the oil drain bolt and completely drain the gasoline out of the carburetor to proper container and screw
the oil drain bolt down. Remove the sediment bowl after closing fuel cock, and completely pour the gasoline
out the sediment bowl. Finally reinstall the sediment bowl back and screw it down.
Fig.25
CARBURETOR OIL DRAIN PLUG