Product Manual

Attention: Release (disengage) the auger and drive control lever (handles) before adjusting the drive

speed control lever. NEVER change the drive/gear speed while your snow thrower is in motion, as it

will damage the drive mechanism and void the warranty.

DRIVE SPEED/GEAR CONTROL

Move the drive speed control lever to the desired speed.

There are six (6) settings: four (4) forward

speeds and two (2) reverse speeds.

1 is the slowest forward speed and 4 is the fastest forward

speed. R1 is the slowest reverse speed and R2 is the fastest

reverse speed.

Note: There is no neutral drive setting since the drive

control handle must be engaged for movement. Neutral

is achieved when the drive control handle is disengaged.

CHUTE DISCHARGE DIRECTION ADJUSTMENT

WARNING - Never direct the snow discharge chute at the operator, bystanders, vehicles or

nearby windows. Discharged snow and foreign objects accidentally picked up by the Snow

Thrower can cause serious damage and severe bodily injury. Always point the discharge

chute in the opposite direction from potential hazards. The discharge chute can be adjusted 180º by

rotating the chute rotation handle. Rotate the chute rotation handle clockwise to move the discharge chute

to the left; counterclockwise to move the chute to the right.

Auger Control

Lever (Handle)

Drive Control

Lever (Handle)