Use and Care Manual

18
2. Unscrew the spark plug from the engine using the spark plug wrench provided. There is limited space
for the wrench to turn. Use both rows of holes in the spark plug wrench to gain leverage to loosen the
plug.
3. Visually inspect the spark plug for cracks or excessive electrode wear. Replace as necessary.
4. Measure the plug gap with a wire gauge. The gap should be 0.7 to 0.8 mm (0.028-0.031 in).
5. If re-using the spark plug, use a wire brush to clean any dirt from around the spark plug base the
n
re-gap the spark plug.
6. Screw the spark plug back into the spark plug hole using the spark plug wrench. Do not over-tighten
spark plug. Recommended tightening of spark plug is ½ to ¾ of a turn after spark plug gasket contacts
spark plug hole. Reinstall the spark plug boot.
Maintenan
ce Schedule
Item Action Before
each use
5 Hours of
use or first
month
First 25
hours of
use
50 hours of
use or
every 6
months
100 hours
of use or
every year
150
hours of
use or
every
two
years
Blade Inspect x
Blade
m
ounting bolt
Inspect x
En
gine oil
Check x
Chan
ge x x
2
x x
Air
filter
Check x
Clean x
1
x
1
x
1
Replace x
Gr
ass bag Check x
Blade c
ontrol
operation
Check x x
Sp
ark plug
Check x
Replace x
F
uel tank Clean x
F
lywheel brake
pad
Check x
Val
ve
clearance
Check-adjust
x
F
uel line Check Check every 2 years and replace if necessary
1. Se
rvice more frequently when used in dusty areas.
2.Chan
ge engine oil every 25 hours when used under heavy load or in high outside air temperatures.