Instructions / Assembly

18
TROUBLESHOOTING
Problem Cause Solution
Engine fails to start
Spark plug wire disconnected. Connect spark plug wire.
Fuel tank empty or stale fuel. Fill tank with clean, fresh gasoline.
Engine not primed. Press primer bulb.
Faulty spark plug. Clean, adjust gap, or replace.
Blocked fuel line. Clean fuel line.
Engine flooded. Wait a few minutes to restart, do not prime.
Spark plug wire loose. Connect and tighten spark plug wire.
Engine runs erratic.
Blocked fuel line or stale fuel.
Clean fuel line. Fill tank with clean, fresh
gasoline.
Water or dirt in fuel system. Drain fuel tank. Refill with fresh fuel.
Dirty air filter Please refer to engine manual.
Engine oil lever low. Fill crankcase with proper oil.
Engine overheats.
Air flow restricted. Clean area around and on top of engine.
Spark plug fouled, faulty, or
gap too wide.
Reset gap or replace spark plug.
Idles poorly.
Dirty air cleaner. Please refer to engine manual.
Blade loose or unbalanced. Tighten and balance blade.
Excessive
vibration/noise
Bent/damaged blade. See an authorized service dealer.
Wet grass.
Do not mow when grass is wet, wait until
dry to cut.
Mower will not mulch
grass.
Excessively high grass.
Mow once at a high cutting height, then
mow agai
n at desired height or make a
narrower cutting path.
Uneven cut. Dull blade. Sharpen or replace blade.