Instructions / Assembly

ADJUSTING THE CUTTING HEIGHT

Warning! Cutting height adjustments should only be performed after the engine and blades

have come to a complete stop!

It is always best to begin cutting your lawn with a higher deck height to prevent scalping your lawn.

Rear wheel

The cutting height for the rear wheels is adjusted with a single lever.

Actuate the adjustment lever and pull it to the required position.

Please make sure that the lever locks into position.

Front wheel

The single front wheel must be adjusted to the same cutting height as

the rear wheels to ensure and even cut. Remove the axle bolt and

adjust to the desired height.

Adjusting the Handle Height

You can raise or lower the handle to a position more comfortable for

you.

1. Lift the handle slightly and pull the handle-lock lever rearward to

disengage' the handle-lock pins

2. Rotate the handle and align the desired notch in the handle

bracket to the handle-lock pins;

3. Release the handle-lock lever to secure the handle in place.

Cutting height adjustment lever

handle-lock lever