User Manual Electric Lawn Mower DB6806, 120V, 12A, 16” Warning: service department at 1--800--791--9458.
Contents Contents...............................................................................................................................2 Product Specifica Safety informa .........................................................................................................2 ............................... .. .........................................................................3 -6 Symbols ........................................................................................................
SAFETY INFORMATION GENERAL OPERATION • Carefully read all instructions on the mower and in the manual before attempting to assemble and operate the mower. Keep this manual in a safe place for future reference, and consult it regularly. • Become familiar with all controls and their proper operation.
OPERATING ON A SLOPE Slopes are a major factor related to accidents involving slips and falls, which can result in severe injury. Operating the mower on a slope requires extra caution. If you feel uneasy on a slope, do not mow it.
• When it is not in use, store the mower indoors in a dry area, locked up or out of the reach of children. DOUBLE INSULATED LAWN MOWER Double insulation eliminates the need for a three-‐wire grounded power cord and grounded power supply system.
SAFETY INFORMATION SLOPE GAUGE • Use this page as a guide in order to identify slopes that cannot be mowed safely. • DO NOT USE the lawn mower on these slopes. • SIGHT AND HOLD THIS EDGE LEVEL WITH A VERTICAL TREE. • FOLD ON THE DOTTED LINE. THIS REPRESENTS A SLOPE OF 15°.
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product.
KNOW YOUR LAWN MOWER Read this operator's manual and safety rules before operating your lawn mower. Compare the illustration in Figure 1 to your lawn mower in order to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
ASSEMBLY INSTRUCTIONS UNPACKING • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping.
ASSEMBLY INSTRUCTIONS The lawn mower is delivered unassembled. The complete push bar and the grass collector must be assembled before using the lawnmower. Follow the operating instructions step-‐by-‐step and use the pictures provided as a visual guide to easily assemble the machine.
ASSEMBLY INSTRUCTIONS INSTALLING THE GRASS COLLECTOR (See Figure 4-‐5) Install the left and right bottom cover of grass collector together using the screws provided. Assemble the top and bottom cover of grass collector together as shown in (Fig.
OPERATING YOUR LAWN MOWER CONNECTING THE POWER CORD Selecting an Extension Cord The chart below shows the length of extension cords and the corresponding acceptable cord ratings. For a 50' (15 m) cord, use 16 AWG. For a 100' (30 m) cord, use 14 AWG. For a 150' (45 m) cord, use 12 AWG.
OPERATING YOUR LAWN MOWER STARTING/STOPPING THE MOWER (See Figure 6) To start the motor: • Plug the mower into an approved outdoor extension cord. • Press and hold the start button (1). • Pull the quick release lever (2) upward to the handle to start the mower and release the button.
OPERATING YOUR LAWN MOWER CUTTING HEIGHT ADJUSTMENT (See Figure 7) When shipped, the wheels on the mower are set to a low-‐cutting position. Before using the mower for the first time, raise the cutting position to the height best suited for your lawn. The average lawn should be between 1 1/2" to 2" (3.
OPERATING YOUR LAWN MOWER MOWING THE LAWN NOTE: A sharp blade will greatly enhance the performance of the mower, especially when cutting high grass. Be sure to check the blade and to sharpen it at least once per year, as described in the Maintenance section.
MAINTENANCE REPLACING T HE CUTTING BLADE (See Figure 10 -‐ 11) For safety reasons, we recommend having the blade replaced by an authorized professional. Important! Wear work gloves! Only replace the blade with a genuine replacement blade, as this will ensure top performance and safety under all conditions.
CLEANING THE MOWER W A R N I N G To reduce the risk of electric shock, do not expose the mower to water. The underside of mower deck should be cleaned after each use as grass clippings, leaves, dirt and other debris will accumulate causing rust and corrosion.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION The handle is not in position Carriage bolts are not seated properly. Adjust the height of the handle and make sure the carriage bolts are seated properly. Cam handle is not tightened. Tighten cam handle.
WARRANTY-ONE YEAR WARRANTY For one year from date of retail purchase within U.S.A., the manufacturer will, at its option, repair or replace, for the original purchaser, free of charge, any part or parts found to be defective in material or workmanship. This warranty covers units which have been operated and maintained in accordance with the owner's instructions furnished with the unit, and which have not been subject to misuse, abuse, commercial use, neglect, accident improper maintenance or alteration.
