Use and Care Manual

WARNING: Do not force the chute so far forward that a gap appears between the deflector and

the chute itself. Snow or other debris could be thrown through the gap and back at the operator,

resulting in serious personal injury.

WARNING: Do not adjust the chute deflector while the bail switch is engaged. Always release

the bail switch before adjusting the chute deflector.

Panel Control

WARNING! AVOID INJURY. Read and understand the entire safety section before proceeding.

Snow blower controls and features are described below.

1. Forward Button - 4 Forward speeds.

2. Reverse Button- 1 Reverse button.

IMPORTANT! DO NOT change motion from forward to reverse with trigger engaged.

3. LED Light Button

4. Fault Light

5. Battery Light Indicators.

6. ON/OFF Button

To Clear the Chute

1. Shut the motor and auger off!

2. Remove the battery pack from the snow blower.

3. Wait 10 seconds to be sure the auger has stopped rotating.

4. Always use a clean-out tool, such as a wood rod or other clearing tools that are commercially

available; do not use your hand.

Fig.13