Use and Care Manual

14
To Remove Battery Pack
1. Remove safety key.
2. Press and hold the battery latch button at the bottom of the battery pack.
3. Remove battery pack from the product.
NOTICE: Make sure that the latch on the snow blower snaps into place and that the battery pack is
secured to the unit before starting operation.
To Start Snow Blower
1. Install the battery pack to snow blower.
2. Insert safety key and close cover.
3. Push the safety button and squeeze the auger trigger against the left handle at same time.And you
can release safety button after auger turning.
To Stop Snow Blower
1. Release the auger trigger.
2. Remove safety key.
3. Remove the battery pack and store in a secure location out of the reach of children.
To Engage Drive Trigger
1. Squeeze the drive trigger against the right handle to engage the wheel drive for propelling unit.
2. Release trigger to stop movement
Fig 9
Fig.8
Auger Trigger