DB2401 CORDLESS
4 5 9 10 16 22 22 FEATURE IDENTIFICA TION TECHNICAL Charger power input: Power output: DC 40V ±10% 34.
T S Connect line Battery holder S T Charger Battery
ST5x20 12 3 JJ S 3
Please read and understand this entire manual before attempting to assemble, operate or install the product.
er DB2202 DB2102
Amerisun service.
W
W
7.
12 x1
17 17
CHARGER OPERATION Note: Before using the machine make sure that the battery is charged. 1. When you turn on the unit the LED light shows red 2. Insert battery pack in the charger and the LED light will show green When the temperature is too high the charger will automatically cool. And the LED light will show orange After the temperature returned to normal the charger will continue to charge. 2. After current charging is completed, the LED light will show green.
1. Safety key. Put the battery pack into its holder.
The unit vibrates check all knobs often for tightness.
Key not inplace Put key into place next to the battery. Battery not in place Take the battery out of the charger.And put in unit. Battery running low Stop and recharge the battery.
Do not store the battery in the unit. Recharge after each use. Two Two 2016 22 ITASCA.
