Use and Care Manual

3. Lock the cable to the lower handle using cable clip.

4. Insert the recoil starter handle cable into the hook provided on the upper handle. You must engage the

start/stop control to release the recoil starter handle.

SIDE DISCHARGE CHUTE

1. Lift the spring-loaded discharge cover located on the side of the mower.

2. Slide two hooks of the side discharge chute under the hinge pin and lower the spring on the side

discharge cover.

Caution: Do not attempt to remove the permanently mounted spring loaded side discharge cover at any

time.

Recoil starter handle

Cable Clip

Start/Stop Control