Manual

Form TI MV410-4 v3 Page 4
HydroGuard 410—Model 4
1 034-222G Screw (8-32 x 1-
3
⁄4″) C.P. Brass
2 — See note below —
3 420-225 (4) Plug Button C.P. Steel
4 030-070 Screw (8-32 x
1
⁄8″) Brass
5 410-359 Handle Lucite
6 410-360 Extension C.P. Brass
7 401-339 Retainer Rubber
8 410-374 Dial Insert Aluminum
9 420-216 (20) Screws (8-32 x 2″) C.P. Steel
10 410-389 Dial Plate C.P. Zinc
11 030-885 Bonnet Screws (4) 10-32 x 1″ Stainless Steel
12 030-884 Adjustable Stop Screw 10-32 x
5
⁄16″ Stainless Steel
13 410-366 (25) “O”-Rings (
3
⁄8 x
1
⁄2 x
1
⁄16″) Buna-N
14 401-165 Adjustable Limit Stop Brass
15 401-278 Adjustable Stop C.P. Steel
16 410-377 Support Ring Stainless Steel
17 401-162 Bonnet Noryl
18 ** Bonnet Gasket Rubber
19 410-369 (10) Wavy Washer Stainless Steel
20 410-368 (10) Flat Washer Synthane
21 401-176 Stem —
22 ** Shut-Off Discs Buna-N
23 ** Quad Ring Buna-N
24 * “O”-Ring (4-Port Only) Buna-N
25 ** “O”-Ring (
3
⁄4 x
15
⁄16 x
3
⁄32″) Buna-N
26 ** Balance Chamber Celcon
27
401-158 4-Port Body Bronze
401-160 3-Port Body Bronze
28 401-210 Strainer Caps Celcon
Item Product No. Description Material Item Product No. Description Material
**NOTE: To replace lever handle, convert from square to round stem, order:
410-448 Lever Handle
410-378 Stem Kit
410-371 Temp. Stop
( ) Number of items per package.
* Used on 4-port mixers only. No discharge will occur when used in 3-port mixer.
** Items available in kits on page 2.
CALIFORNIA PROPOSITION 65 WARNING
WARNING: This product contains chemicals
known to the State of California to cause cancer
and birth defects or other reproductive harm.
(California law requires this warning to be given
to customers in the State of California.)
For more information: www.wattsind.com/prop65
© 2004 Powers, a division of Watts Water Technologies, Inc.
USA Phone: [phone] • Fax [phone]
Canada Phone: [phone] • Fax [phone]
www.powerscontrols.com
Form TI MV410-4 v3 0425 EDP# 6512226 Printed in U.S.A.
PARTS LIST