Operation Manual

POWXG2061 EN
Copyright © 2015 VARO P a g e | 15 www.varo.com
14 TROUBLESHOOTING
What to do when…
Source of problem
Corrective action
Source of problem
Corrective action
1. The engine will not start or will not
keep running
4. The engine runs irregularly and lacks
in power when revved
Incorrect starting
procedure
Follow the
instructions (see
chapter 3)
Dirty spark plug or
incorrect distance
between the electrodes
Check the spark
plug (see chapter
5)
Dirty spark plug or
incorrect distance
between the
electrodes
Check the spark
plug (see chapter 5)
Carburation problems
Contact your
dealer
5. The engine makes too much smoke
Incorrect composition
of the fuel mixture
Prepare the fuel
mixture
according to the
instructions (see
chapter 2)
Air filter clogged
Clean or replace the
filter (see chapter 5)
Carburation
problems
Contact your dealer
2. The engine starts but is lacking in
power
Carburation problems
Contact your
dealer
6.The machine starts to vibrate
abnormally
Air filter clogged
Clean or replace the
filter (see chapter 5)
Damaged or loose
parts
Stop the
machine and
disconnect the
spark plug cable.
Inspect for
damage. Check
for and tighten
any loose parts.
Have all checks,
repair work and
replacements
carried out by a
specialized
centre only
Carburation problem
Contact your dealer
15 WARRANTY
This product is warranted for a 36-month period effective from the date of purchase by the
first user.
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
You can always obtain more information at the number 00 32 3 292 92 90.